Resetting a Daikin air conditioner can vary slightly depending on the model and type of remote control you have.
However, I’ll provide a general guide that should work for most Daikin air conditioners. In this 1000-word explanation, we will cover the steps for resetting your Daikin air conditioner.
Step 1: Prepare Your Remote Control
Before you can reset your Daikin air conditioner, make sure you have the remote control that came with it.
Ensure that the remote control has functioning batteries.
If the batteries are dead or weak, replace them with new ones to ensure proper communication with the air conditioner.
Step 2: Turn Off the Air Conditioner
If your Daikin air conditioner is currently running, turn it off.
You can do this either by using the remote control or by pressing the power button on the indoor unit of the air conditioner. Wait for the unit to completely power down.
Step 3: Access the Mode Selection
On your Daikin remote control, you’ll find a set of mode selection buttons. These buttons typically include options like “Cool,” “Heat,” “Dry,” “Fan,” and “Auto.”
To reset the air conditioner, you’ll need to put it in a specific mode. Usually, “Cool” mode works for most reset procedures. Press the “Cool” button on your remote control.
Step 4: Access the Temperature Control
Next, locate the temperature control buttons on your remote control. There should be buttons to adjust the temperature up and down.
Press the “Up” button to increase the temperature setting to its maximum value. This step is essential for initiating the reset process.
Step 5: Access the Fan Speed Control
Some Daikin air conditioners require you to adjust the fan speed for the reset process. Look for the fan speed control buttons on your remote control.
These buttons typically have options like “Low,” “Medium,” and “High.” Press the “High” button to set the fan speed to its maximum level.
Step 6: Access the Swing Control
Certain Daikin models also require you to activate the swing function for the reset.
Look for the swing control button on your remote control; it’s often represented by a symbol that resembles oscillating waves.
Press the “Swing” button to activate the swing function.
Step 7: Press and Hold the “Cancel” Button
Now that you’ve set the mode to “Cool,” increased the temperature to the maximum, set the fan speed to “High,” and activated the swing function, it’s time to initiate the reset.
Press and hold the “Cancel” button on your remote control. This button is typically labeled as “Cancel,” “Reset,” or “Clear.” Hold it for approximately 5 to 10 seconds.
Step 8: Wait for the Reset
While holding the “Cancel” button, you should see the display on your remote control or the indoor unit of the air conditioner respond in some way.
It may beep, flash, or display a message indicating that the reset process has been initiated. Continue holding the button until you receive this confirmation.
Step 9: Release the “Cancel” Button
Once you’ve received confirmation that the reset process has started, release the “Cancel” button on your remote control.
Step 10: Turn Off the Air Conditioner
Now that the reset process has been initiated, turn off the air conditioner by pressing the power button on the indoor unit or using the remote control. Wait for the unit to power down completely.
Step 11: Turn On the Air Conditioner
After waiting for a few minutes (usually 3-5 minutes), turn the air conditioner back on.
Use the remote control or the power button on the indoor unit to do this. The air conditioner should now be reset to its default settings.
Step 12: Reconfigure Your Settings
Once the air conditioner is back on, you’ll need to reconfigure your desired settings.
Use the remote control to select the mode (Cool, Heat, Dry, Fan, Auto), set the temperature, adjust the fan speed, and activate any additional functions (e.g., swing function) according to your preferences.
Step 13: Test the Air Conditioner
To ensure that the reset was successful, test the air conditioner to see if it’s functioning correctly.
Check if it’s cooling or heating as expected and that the settings are responding to your commands.
Final Conclusion on How to Reset Daikin Air Conditioner?
Congratulations! You’ve successfully reset your Daikin air conditioner.
Keep in mind that this guide provides a general procedure that should work for most Daikin models.
However, if your specific model or remote control is different, consult your user manual for model-specific reset instructions.
Additionally, if the reset process doesn’t work as expected, it’s advisable to contact a Daikin service technician for further assistance.